Doctor blades for flexographic and rotogravure printing Print Range
The PRINT range is composed of carbon Swedish steel and stainless steel doctor blades, with high mechanical resistance and high density.
The PRINT range doctor blades are suitable to all the flexographic and rotogravure print applications, used with solvent inks and water-based inks.
Every doctor blade can be produced with three different edges, to be defined considering the peculiar production needs.
For the flexographic print, English polyester doctor blades are also available, with high density.
PRINT 300
Swedish carbon steel with high density.
Extra fine structure, high purity.
Optimal for medium-long duration with solvent inks.
PRINT S100
Swedish stainless steel.
High resistance to corrosion.
Optimal for medium duration with water-based inks.
PRINT S300
Swedish stainless steel
13% chrome.
Very High resistance to corrosion and to wear.
Optimal for medium-long duration with water-based inks.
Edges Shapes
Step
Pre – sharpened edge
with step lamella
• Long life, referred to the quality.
• High printing quality, also
with high printing speed.
• High flexibility
and vibrations absorptionz .
• Optimal adaptability
to the machine parameters .
• Best machine efficiency.
• Easy to use and easy machine set-up.
Bevel
Pre – sharpened edge with bevel lamella
• Similar to the ROUND edge but
more flexible.
• Long life
• High printing quality.
• Best machine efficiency
• Easy to use and easy machine set-up.
Round
Rounded edge
whitout lamella
• Very long life.
• High rigidity.
• Good printing quality.
Measures range
Thickness 0,10 – 0,15 – 0,20 – 0,25 – 0,30 mm
Width: 10-20-25-30-32-35-38-40-45-50-55-60-70 mm
Other widths and thicknesses available on request.
Doctor blades for flexographic and rotogravure printing Plus Range
The PLUS range is composed of doctor blades made with special Swedish carbon steels, studied to obtain the best wearing resistance and consequently the maintenance of the initial geometries that assure a regular printing quality.
The PLUS range doctor blades are suitable for flexographic and rotogravure printing, mainly using solvent inks. PLUS is ideal to be used in particularly difficult printing conditions, with highly abrasive inks, for example the white colors, and specific needs of high graphic definition.
Every doctor blade can be produced with three different edges, to be defined considering the peculiar production needs.
The PLUS range is composed of doctor blades made with special Swedish carbon steels, studied to obtain the best wearing resistance and consequently the maintenance of the initial geometries that assure a regular printing quality.
The PLUS range doctor blades are suitable for flexographic and rotogravure printing, mainly using solvent inks. PLUS is ideal to be used in particularly difficult printing conditions, with highly abrasive inks, for example the white colors, and specific needs of high graphic definition.
Every doctor blade can be produced with three different edges, to be defined considering the peculiar production needs.
X PLUS
Swedish carbon steel with high density.
Ultra fine structure, high purity.
Optimal for long duration with particularly abrasive solvent inks.
Very high definition of printing.
XX PLUS
Swedish carbon steel with very high density.
Ultra fine structure, high purity.
Optimal for long duration with particularly abrasive solvent inks.
Very high definition of printing.
Edges Shapes
Step
Pre – sharpened edge
with step lamella
• Long life, referred to the quality.
• High printing quality, also
with high printing speed.
• High flexibility
and vibrations absorptionz .
• Optimal adaptability
to the machine parameters .
• Best machine efficiency.
• Easy to use and easy machine set-up.
Bevel
Pre – sharpened edge with bevel lamella
• Similar to the ROUND edge but
more flexible.
• Long life
• High printing quality.
• Best machine efficiency
• Easy to use and easy machine set-up.
Round
Rounded edge
whitout lamella
• Very long life.
• High rigidity.
• Good printing quality.
Measures range
Thickness: 0,15 – 0,20 – 0,25 – 0,30 mm
Width: 20-25-30-35-40-50-60 mm
Other widths and thicknesses available on request.
Serie Poly Print
High-density POLYESTER and POLYETHYLENE doctor blade
for flexographic printing.
To be used to hold ink in the doctor blade chamber or
to clean the Anilox rolls.
Available in different thicknesses and heights.
POLYETHYLENE
90°edges or with specific bevel angle of 30°- 45°
Standard heights: 30-35-40-50 mm
Thicknesses: 0,80 – 1 – 1,2 – 1,5 – 1,6 – 2 – 2,5 mm
POLYESTER
90° edges or with specific bevel angle of 13°- 22°- 30°- 45°
Standard heights: 30-35-40-50 mm
Thicknesses: 0,20 – 0,35 – 0,50 – 0,70 – 1 mm
Edges Shapes
Square
Edge 90°
whitout lamella
Bevel
Edge
with bevel
Doctor blades for printing of tissue paper
The TISSUE PRINT range is composed of Swedish stainless doctor blades, with high percentage of Chrome, with very high density and excellent corrosion resistance.
They are suitable to the tissue printing, with water-based inks.
Every doctor blade can be produced with three different edges, to be defined considering the peculiar production needs.
the print range is composed of carbon Swedish steel and stainless steel doctor blades, with high mechanical resistance and high density.
They are suitable to the tissue printing, with water-based inks.
Every doctor blade can be produced with three different edges, to be defined considering the peculiar production needs.
TISSUE PRINT S100
Swedish stainless steel.
High resistance to corrosion.
Optimal for medium duration with water-based inks.
TISSUE PRINT S300
Swedish carbon steel with high density.
Ultra fine structure, high purity
and to wear.
Optimal for medium-long duration with
water-based inks.
Edges Shapes
Step
Pre – sharpened edge
with step lamella
• Long life, referred to the quality.
• High printing quality, also with high printing speed.
• High flexibility and vibrations absorption.
• Optimal adaptability to the machine parameters.
• Best machine efficiency.
• Easy to use and easy machine set-up.
Round
Rounded edge
whitout lamella
• Very long life.
• High rigidity.
• Good printing quality.
Measures range
Thickness: 0,20 – 0,30 mm Width: 35 – 50 – 60 – 70 – 80 – 90 mm
Other widths and thicknesses available on request.
Sealers
Sealers for flexographic chamber, in every material and shape.
The sealers are produced with laser cut, to maintain precise shapes and dimensions and the best superficial finish, to obtain the right and complete adherence to the cylinder and consequently an optimal control of the inks.
Used materials can have different densities, to be defined studying the peculiar needs or respecting the used material features.
SEALERS IN STANDARD EVA MATERIAL
SPECIAL SEALERS WITH SPECIFIC INSERT FOR INCREASED DURABILITY AND SEALING
FELT SEALERS
MILLED SEALERS, SPECIFIC SHAPES OBTAINED FROM SOLID PIECES, WITHOUT GLUING
Are you interested in ours
Doctor blades?
Contact us
Enter your phone number
and we will call you with no obligation
Or fill out the form